GORDON MILLER SIDE VISOR FOR HIJET
Efficiently reduces fogging caused by moisture, such as rain, and allows natural ventilation inside the vehicle.
The mold is manufactured using a 3D scan of the actual vehicle, ensuring an exceptional fit.
The acrylic used is impact-resistant and rubber-blended.
It maintains its transparency and boasts strength and durability that will not break even if bent or dropped violently.
Vacuum molding minimizes foreign matter contamination, ensuring a thickness that is neither too thick nor too thin, yet still maintains high transparency.
Finishing is done at our domestic factory using state-of-the-art laser cutting and manual inspection, polishing, and finishing to ensure a high-quality product.
The subtle GORDON MILLER industrial logo sets it apart from the rest.
■Material: Acrylic
■Expanded Size: (Approx.) L778mm
■Weight: 800g
■Country of Origin: Japan
■Accessories: 4 Brackets
■Precautions for Use
- This product is designed specifically for each vehicle model and is tailored to the shape of the vehicle.
- Do not use on any vehicle other than the intended model.
- This product cannot be reused once removed.
- When installing this product, install carefully and do not pull too hard. Applying excessive force may cause breakage or damage to the vehicle.
- Always check that the product is securely installed before driving.
- Regularly check for any looseness in the unit or loose rivets.
- If the product becomes misaligned while driving, immediately park the vehicle in a safe place and remove the product or reattach it correctly.
- If you notice any abnormalities with this product, immediately discontinue use.
- Keep this product away from open flames.
- Do not use for any purpose other than its intended use. - Please note that we cannot be held responsible for any accidents or other incidents resulting from the improper use of this product.
- *The specifications and appearance of this product may change without notice.
■ Before Starting
- Shut off the vehicle engine and work in a safe place.
- Perform installation in a dust-free area.
- Installation at temperatures below 15°C will reduce the viscosity of the double-sided tape, which may lead to it falling off or peeling.
- Be sure to degrease the surface before installation. Oil, grease, or dirty moisture on the double-sided tape may cause it to fall off or peel.
- Regardless of the season, when installing, use a hair dryer or similar device to warm the vehicle's mounting surface and this product's double-sided tape to body temperature (approximately 40°C) before attaching.
- To promote stronger adhesion, avoid contact with water for 30 minutes after installation.
- Avoid washing the car within 24 hours of installation.
■Code: 01743240
Efficiently reduces glass fogging caused by rain or other moisture, allowing natural ventilation inside the vehicle. The mold is manufactured using a 3D scan of the actual vehicle, ensuring an exceptionally precise fit.
The acrylic used is impact-resistant, incorporating rubber. It maintains its transparency and boasts strength and durability that will not break even if bent or dropped violently.
Vacuum molding minimizes foreign matter contamination, ensuring a thickness that is neither too thick nor too thin, yet still maintains high transparency.
Final finishing at our domestic factory: State-of-the-art laser cutting and manual inspection, polishing, and finishing ensure a high-quality product.
The subtle GORDON MILLER industrial logo sets it apart from the rest.
