eXtremeRate Programmable Remap Kit for Xbox Series Upgrade Board for Xbox Core Controller with Redesigned Back Side and Rear Buttons X/S Controllers,

--------------------------------------------------- 【Condition】 Please check the product description and photos for the condition. Some items may have not been tested or may show signs of use.

【Included Items】 Accessories are limited to those shown or mentioned in the product description. Items such as manuals, boxes, or cables are not included unless specifically stated.

【Product Specifications and Firmware】 Some Japanese domestic models may have limited functionality overseas. Please check compatibility before purchase.

【Voltage Compatibility】 Our products are selected to support international voltage ranges (e.g. 100–240V). However, please make sure your local voltage is compatible before use, as incorrect voltage may still cause malfunction.

【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary.

【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product.

【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without appropriate voltage or equipment. --------------------------------------------------- Turn your current Xbox Series X/S controller into a professional eSports elite controller. Compatible with Xbox Series X/S controllers, as well as Xbox Core controllers (Model 1914). (Please check your controller model before purchasing.) Four ergonomic and programmable rear button attachments have been added. Please note that use of this kit is at your own risk. You can assign up to 14 buttons to the back button. If you have any problems, please contact us by message. Xbox Series X/S controllers are compatible with the eXtremeRate LED Kit, Clicky Kit, and FLEXOR side rails. Installation requires disassembly of the controller and a high level of practical skill. The HOPE-FPC board also requires soldering. Search "eXtremeRate Hope Remap Kit for Xbox Series X/S Controller" on YouTube to watch the installation video. Preparing for eSports tournaments: The eXtremeRate HOPE Remap Kit for Xbox Series X/S is an evolutionary upgrade kit that adds a level of gaming functionality to your controller. This remap kit allows you to easily turn your Xbox Series X/S controller into a professional eSports elite controller. This remap upgrade solution is competitive and fully legal for online gaming and tournaments. The 14 buttons are remapped to the four additional buttons, and you press these two buttons with your middle finger. This is a benefit as you don't have to move away from the sticks or triggers to access other buttons, such as the face buttons, during fast-paced FPS or shooter games. Notes: Compatible with Xbox Series X/S controllers, as well as Xbox Core controllers (Model 1914). (Please check your controller model before purchasing.) Back button kit only. Controller not included. Not a back button controller! Installation requires disassembly of the controller and requires a high level of practical skill. Use of this kit is at your own risk. About installation: Difficulty to install: High Before installation, please search for "eXtremeRate Hope Remap Kit for Xbox Series X/S Controller" on YouTube and watch the installation instruction video. If you have any problems during the installation, please contact us via message. The FPC board needs to be soldered, and the FPC board needs to be fixed with double-sided tape before soldering. Please be careful not to pull on the Hope-FPC cable when soldering. The soldering time for each TP point is less than 1 second. After soldering, you can test it on the test board. If all LEDs on the tester board are not lit, please check whether the P2 and TP35 soldering points are soldered correctly. If only some of the LEDs do not light up, please check the corresponding soldering points to see if they are soldered correctly. Turn the toggle switch to the right, the blue light will come on and you will enter button programming mode. You can activate the remapping program during the game to assign up to 14 buttons (A, B, X, Y, L3, R3, LT, RT, LB, RB, Up, Down, Left, Right) to the back button. Package includes: Hope remap board*1 Hope tester board*1 Hope cable FPC1 & FPC2 & FPC3*1 Redesigned back shell with cover*1 Left and right side rails*1 Back buttons*4 Pry tool*1 T8h & T6 & Phillips screwdriver*1 Screws*29 Please note: Controller and other parts are not included.