TAMIYA 1/10 Electric RC Car Series No.707 1/10RC XV-02 PRO Chassis Kit 58707

[Product Infomation]

Brand : TAMIYA Materials : Plastic

[Product Description]

・The motor is placed vertically in the front middle, and power is transmitted from the spur gear in the center of the vehicle via the front and rear propeller shafts of equal length. This is a shaft drive 4WD chassis that expands the driving field, allowing you to enjoy exciting rally driving on flat dirt as well as on-road. -Equipped with 39T gear differentials front and rear, and one 40T gear set for setting. It is also possible to change the front and rear drive distribution by changing the combination. Furthermore, heavy items are mounted closer to the center, and the chassis width has also been narrowed. The double wishbone 4-wheel independent suspension is equipped with a long oil damper made of aluminum cylinder. ・[Main equipment parts] Drive system: Full bearing specification, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (set of 2 39T and 1 40T), front and rear universal drive shafts ・Suspension: Front and rear aluminum long dampers (blue cap specification), caster blocks with a caster angle of 6 degrees, turnbuckle upper arm ・Chassis area: Front urethane bumper with skid angle, polycarbonate chassis cover, aluminum servo mount, high torque servo saver

Product introduction

[Authentic rally chassis that expands the driving field] The motor is placed vertically in the front middle, and power is transmitted from the spur gear in the center of the vehicle via equal length front and rear propeller shafts. This is a shaft drive 4WD chassis that expands the driving field, allowing you to enjoy exciting rally driving on flat dirt as well as on-road. Equipped with 39T gear differentials front and rear, and one 40T gear set for setting. It is also possible to change the front and rear drive distribution by changing the combination. Furthermore, heavy items are mounted closer to the center, and the chassis width has also been narrowed. The double wishbone 4-wheel independent suspension is equipped with a long oil damper made of aluminum cylinder.

[Main equipment parts] ■Drive system: Full bearing specification, front and rear aluminum propeller shafts, front and rear oil-filled gear differentials (set of 2 39T and 1 40T), front and rear universal drive shafts ■Suspension: Front and rear aluminum long dampers (blue cap specification), caster block with 6 degree caster angle, turnbuckle upper arm ■Chassis: Front bumper with skid angle, polycarbonate chassis cover, aluminum servo mount, high torque servo saver

[Basic specs] ●Chassis length 368mm (excluding body etc.) ●Chassis width 180mm ●Wheelbase 257mm ●Frame = Bathtub type ●Drive system = Front midship motor, shaft drive 4WD ●Differential gear = Oil-filled gear differential on both front and rear ●Steering = 3-split tie rod type ●Suspension = 4-wheel double wishbone ●Damper = Long oil damper made of aluminum cylinder (blue cap specification) ●Gear ratio = 9.58:1 when using the 19T pinion included in the kit (13 types of gear ratios from 10.71:1 to 6.28:1 can be selected by combining with the pinion sold separately) ●Speed ​​controller = ESC specification (sold separately)

[What you need to purchase separately] ●Body ●540 type motor ●RC mechanism: 2-channel radio set (transmitter, receiver, ESC, low profile servo recommended) ●Battery for running ●Charger ●Power source for transmitter

*Batteries, batteries, chargers, etc. are required to operate this product, but they are not included in this product. Also, the body, motor, transmitter, RC mechanism, etc. are not included. Additional parts purchase, assembly, and painting are required before driving. *This product does not use fuel. This product does not contain fuel. *This product does not include paint or adhesive.

safety warning

Please drive in a wide and safe place such as a dedicated RC car circuit. Never run it on the road. Do not run in crowded areas, parks, or near small children. Do not run it in small spaces or indoors. Please do not run it in places where it may be a nuisance to others, such as schools, hospitals, or residences. Do not run at night or early in the morning.

[Important Note - For Overseas Customers]

Thank you for purchasing this product. Please read the following important notes carefully before using this product overseas.

1. Legislation and safety standards This product complies with Japanese safety standards. Please check compatibility with local regulations and safety standards before use in your country. Certain product categories (electronics, cosmetics, food, etc.) may require certification from the importing country.

2. About electrical products [Voltage compatible] When using electrical appliances, please note that they are designed according to Japanese voltage specifications (90-110V), so using them at a different voltage may cause malfunctions.

[Plug type] Our products use the Japanese plug type (A type or B type). Please use a conversion adapter if necessary.

[Important notes regarding transformers and adapters] A transformer adjusts the voltage to suit the requirements of the equipment. Conversion adapters only change the shape of the plug and do not adjust the voltage. Using only the conversion adapter without a transformer may damage the product.

[About responsibility] We are not responsible for any failure or damage caused by improper usage, such as operating the product without a transformer.

3. Language and manual Product instructions and displays may only be in Japanese. The English version of the manual can be downloaded from our website.