Function : Decorative,Explosion-Proof,Heat Insulation,UV Protection,DIY,security theft
Surface Treatment : Embossed,Frosted / Etched,Opaque,Stained,MIRROR,3D
Type : Glass Films
Feature : Self-Adhesive
Material : PET
Origin : China
size : wide 30cm 45cm 60cm 75cm 90cm by long 100cm or 200cm
name : window privacy film vinyl for glass windows
window film : window sticker window film anti look
stained glass : privacy film window sticker for glass window
window tint : adhesive for glass windows adhesive window film
window vinyl : stained glass window film
term of use : Five to eight years.
function : furniture protection
function 1 : heat control privacy sun protection
If you need a wider size: e.g. a width of 60cm, 70cm, 75cm, 80cm or 90cm.
You can open the following link to buy
You can also click on the picture to be redirected to the purchase link.
https://www..us/item/3256806399043595.html?gatewayAdapt=glo2usa4itemAdapt
Small Tips for YOU,please read before buying.
*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.
*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).
*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)
Key FeaturesPrivacy Levels > 4 Star: create privacy and favorable space, easy to cut into any sizes to meet your special demands.
Blocks Strong Sunlight and 96% Harmful Uv Rays: let soft lights in, heat insulation in the summer and heat preservation in the winter.
Thenew strong glue designwill help the mirror window film cling on the window surface firmly and make it available for long time use.
Environmental and Economical PVC material: ideal for flat, smooth and clean glass surfaces in the bathroom, balcony, living room, bedroom, bathroom, office,hotel, etc.
Installation Instructions
Step 1. Keep Window or Glass Clean
Step 2. Measure the window and determine size
Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap.
Step 4. Wet the Window or Glass with water( the more flowing water, the better)
Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off.
Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours)
Step 7. Much easier than Wall Decals, 2 people work together more efficiently.
Step 8. Enjoy your works!
If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.
Install with Flowing Water, Say Goodby to Sticky Glue
Frequently Asked QuestionsQ1: Why does the film peel off?
A1: Clean the surface thoroughly and make sure the surface is clean enough without any dust.
Make sure to remove the first tier of the protection film before applying on the window.
Q2: How can the film stick well and lets bubbles disappear?
A2: Use enough water. The more flowing water, the better. Squeeze out excess water and bubbles with scraper or hard card from middle to edge.
Q3: I have a brightly lit street outside of my apartment, does it protect me from prying eyes?
A3: This frosted window privacy film can provide you with 90% privacy protection, when the interior is bright and the exterior is dark, the interior can be seen from the outside with some contours.
Q4: Is this window film reusable? Will there be any glue marks left after tearing it off?
A4: Yes, reusable. No adhesive, water, scraper, and knife are the only tools you will use. Easy to apply and remove without any residue left on the glass.
Επιστροφή χρημάτων λόγω μη παράδοσης
