Product Name: Stainless Steel Portable Thermos / Actual Capacity: 0.58L / Material: 18-8 Stainless Steel (Powder Coated), Polypropylene, Silicone Rubber / BPA Free / Made in China / Heat Retention: 80℃ or higher (6 hours) / Cold Retention: 6℃ or lower (6 hours) *Heat retention is measured 6 hours after filling the product with hot water at a room temperature of 20℃±2℃, closing the lid when the water temperature reaches 95℃±1℃, and measuring the water temperature. *Cold retention is measured 6 hours after filling the product with cold water at a room temperature of 20℃±2℃, closing the lid when the water temperature reaches 4℃±1℃, and measuring the water temperature. *Preheating (pre-cooling) the product for 1-2 minutes by adding a small amount of hot water (cold water) before adding beverages will improve the heat retention (cold retention) effect. ○This product is a beverage bottle. ○Do not use it for purposes other than its intended use. ○Do not use in a microwave oven or dishwasher/dryer. ○Do not place it near fire. ○Do not boil it. ○Keep out of reach of infants and children. ○Do not drop or subject it to strong impacts, as this may cause damage or leakage. ○Do not shake it, as this may cause unexpected injury or accidents. ○Do not shake or subject it to strong vibrations, as this may cause the liquid inside to overflow. ○Do not put dry ice in the container, as this may cause the container to expand, resulting in damage or injury. ○Be careful not to overfill the bottle with beverages, as this may cause it to overflow when closing the lid. ○Use the bottle with the silicone gasket in the correct orientation. ○When closing the lid, make sure it is closed horizontally. ○If the lid is not closed properly, the liquid inside may leak, so make sure it is securely closed. ○After closing the lid, turn the product upside down or on its side to check for leaks. ○To prevent leaks, place the bottle upright when putting it in a bag or similar container. ○Do not carry it with precision equipment such as mobile phones, computers, or cameras, as leakage of the liquid inside may cause damage or malfunction. ○ Do not open the lid immediately after the unit has been subjected to impact or vibration. ○ Do not open the lid while the unit is tilted, as this may cause spills, stains, or burns. ○ When using carbonated beverages, hold the lid firmly and twist slowly to release the gas before opening. ○ Do not open the lid near precision equipment such as mobile phones, as the beverage may spray out. ○ Due to its double-walled structure, even if the part you touch is not hot, the beverage inside or the drinking spout may be hot, so please be very careful not to get burned. ○ When drinking hot beverages, do not tilt the unit suddenly and drink slowly, as the beverage may come out forcefully and cause burns. ○ Do not leave the unit in high-temperature places such as inside a car or in direct sunlight for extended periods. ○ Depending on the usage conditions, such as when the temperature of the contents is high or the quantity is small, carbonation may escape more easily. ○ When using sports drinks containing salt or beverages containing vinegar, check the inside for rust or scratches before use and wash immediately after use. ○ Do not leave the contents inside for extended periods, as this may cause rust or spoilage of the beverage. ○ Leaving hot drinks in the container for extended periods can cause a vacuum to form inside as the contents cool, making it difficult to open the lid or causing the beverage to spray out, potentially leading to burns or spills. Please be careful. ○ If the lid becomes difficult to open, immerse the lid in approximately 50°C water for about 1 minute to make it easier to open. ○ To prevent rust on the stainless steel, remove dirt and moisture promptly, dry thoroughly, and store away from contact with other metals. ○ Do not leave submerged in water, as this may cause rust or damage. ○ Do not use abrasive cleaners or scrubbing brushes when washing. ○ Do not use chlorine bleach, as this may cause rust. ○ If you notice a metallic smell when first using the container, fill it to the brim with 2 tablespoons of vinegar and lukewarm water, wait 30 minutes, and then rinse. ○ If rust-like spots appear inside the container, fill it with lukewarm water and approximately 10% citric acid, wait 2-3 hours, wash with a soft sponge, and rinse thoroughly.
Insulation and cooling effect. The double-walled vacuum structure provides excellent insulation and cooling. Carbonated beverages can also be used. Keeps drinks hot at 80°C or higher and cold at 6°C or lower (for 6 hours).
Durable material. The bottle body is made of 18-8 stainless steel, which is rust-resistant and highly durable. The surface is powder-coated to resist scratches.
Lid with handle. The lid with a handle is convenient for carrying, opens and closes easily, and covers the drinking spout, so you can use it with peace of mind even outdoors where it is prone to getting dirty.
Stress-free drinking experience. The smooth drinking spout, without any protrusions such as screws, is designed to easily hold small ice cubes and allows for easy filling from water dispensers, etc. *Mouth diameter 42mm, minimum inner diameter 33mm
Designed to be used as a carafe. Not only is it suitable for direct drinking, but its size and form also make it easy to use as a carafe for sharing drinks among several people.
Επιστροφή χρημάτων λόγω μη παράδοσης
