Comolife Bio Mold Guard for Under-Sink Use, Set of 2, Mold Inhibitor, Bio, Replaces Every 3 Months, Made in Japan

Our store offers a curated selection of genuine Japanese products. You can shop with complete peace of mind knowing that all our items are authentic. Please note that the instructions and manual for this product may only be available in Japanese.

1. KEY FEATURES: - Bacillus natto congener (OYK bacteria) multiplies tens of thousands of times in 4 to 5 hours and eats the nutrients of mold bacteria, suppressing mold. - OYK bacteria, a congener of Bacillus natto, is a type of bacteria that decomposes fallen plants.Highly safe bacteria used in agriculture etc. - Compared to standard bacteria, the volume is 4 to 10 times larger, and the growth power is 10,000 times larger.Suppressing mold as it grows more and more - Just open the seal and set it aside after cleaning.OYK bacteria scatters around and eats the nutrients of mold, suppressing mold (effective for about 3 months) - Unlike strong detergents such as chlorine-based detergents, it is a natural bio product, so it has less burden on the environment and is safe to handle.

2. PRODUCT DESCRIPTION: Product introduction Natural bio suppresses the growth of mold A set of 2 Bio Mold Yoke-kun under sinks Please place it near areas where mold is likely to grow, such as under the sink or in a cupboard Easy to use, please remove mold and dirt by cleaning before installing "Mold Yoke-kun"The effective microorganism Bacillus natto congener (OYK bacteria) multiplies tens of thousands of times in 4 to 5 hours and eats the nutrients of mold bacteria, suppressing the growth of mold.Compared to standard bacteria, the volume is 4 to 10 times larger, and the growth power is 10,000 times more.It increases rapidly and suppresses mold.Unlike strong detergents such as chlorine, it is a natural bio, so there is less burden on the environment, and it is safe to handle.1.Clean the entire area where you are concerned about mold and remove dirt and mold.2. Place the opened "Kabiyoke-kun" around the area where you are concerned about mold.3.It will be more effective if you shake the container from time to time.4.Please ventilate and circulate the air regularly to make it easier for the bacteria in the container to disperse.If the moisture remains trapped, the product may not transpire sufficiently and may not be as effective.5. When the content of the polymer gradually decreases and the moisture disappears and you no longer feel the effect, replace it with a new product. Depending on the environment, the content will disappear in about 2 months, but since the bio is alive, the effect will continue even after that. Once the content disappears and you no longer feel the effect, it is time to replace it (approximately 3 months) [Precautions for use (common to all types)] - This product is a mold inhibitor.It is not intended to remove mold, dirt, or slime that has already formed. - Mold may grow if mold is not completely eliminated by cleaning. - Please be careful not to allow water or foreign substances to get into the container. - Microbial activity changes depending on the environment, and it may take time to take effect. Please use the product with the idea that it will spread gradually from the installation location to the surrounding area to achieve its effect. - Make sure to provide ventilation and air circulation to make it easier for bacteria to scatter.•This product is a mold inhibitor that uses bacteria, so if you use a detergent with a sterilizing effect or a strong acid or alkaline detergent, it may be less effective. Please be sure to rinse the area where you use it with water. Size: Approx. Diameter 7.1 x Height 6.2 cm Contents/Approx. 120g Set Contents/Set of 2 Country of Manufacture/Japan From Amazon ●Natural bio suppresses the growth of mold!Place it near areas where mold is likely to grow, such as under the sink or in a cupboard.It is easy to use, just install "Moldyoke-kun" after cleaning the mold and dirt.The effective microorganism Bacillus natto congenus (OYK bacterium) suppresses mold growth in the vicinity ●Bacillus natto congener (OYK bacterium) was found in soil in Japan.As a result of the investigation (identification of the bacteria), it was determined that the bacteria belonged to the Bacillus genus (Bacillus or Bacillus) out of hundreds of thousands of types of microorganisms.This species and genus includes Bacillus natto, which produces natto, and is said to be highly safe bacteriologically.DNA salt sequencing of the OYK bacterium has also been completed.The DNA data has been registered as a new species in the international DNA bank (gene bank).It is used to improve soil in fields and to prevent mold from forming on fruits and vegetables, and its safety has been confirmed through rigorous testing. ●If the product is placed in an area where mold is likely to grow, microorganisms will scatter, begin to act, and suppress the growth of mold.It has less environmental impact compared to chemicals.You can reduce the number of times you use chlorine-based, strong acid, or alkaline detergents.Effect lasts for about 2 months ●Ingredients: Effective microorganisms (Bacillus natto congener), water, ethanol, polymer, etc. ●How to use (common to all types of placement): Clean the entire area where mold is concerned once to remove dirt and mold.Place the opened "Kabiyoke-kun" around the area where you are concerned about mold.If you shake the container from time to time to mix the polymer inside, it will be more effective.Please provide regular ventilation and air circulation to make it easier for bacteria inside the container to disperse.If moisture remains trapped, this product may not dry sufficiently and may not be as effective.When the polymer inside gradually decreases and the moisture disappears, replace it with a new product.(About 2 months depending on the environment) ●Precautions for use (common to all types): This product is a mold control agent.It does not remove mold, dirt, or slime that has already formed.Mold may grow if cleaning does not completely eliminate mold.Please be careful not to let water or foreign objects get into the container.Microbial activity changes depending on the environment, and it may take some time for the effects to appear.Please use it with the image that it will gradually spread from the installation location to the surrounding area and exert its effect.Please take care to provide ventilation and air convection so that bacteria can easily spread.This product is a mold inhibitor that uses bacteria, so if you use a detergent with a sterilizing effect or a strong acid or alkaline detergent, it may be less effective.Please make sure to rinse the area where you will be using it with water etc.

3. PRODUCT DIMENSIONS & WEIGHT: - Weight: 0.28 kg - Dimensions: 14.5 x 8.6 x 8.4 cm

4. SPECIFICATIONS: