N1201SA+(PS200) RF Vector Network Antenna Analyzer SWR Meter Tester Tool 34.5M‑2.7G

Name: N1201SA+(PS200) RF Vector Network Antenna Analyzer SWR Meter Tester Tool 34.5M‑2.7G
SKU: 693bbdc8b661e001a867a2c5
Price: 158 EUR
Availability: InStock

Τρέχουσα τιμή

Τιμή 158 €

με ΦΠΑ

ΧρώμαΌπως στην εικόνα

Παράδοση εντός 🇬🇷 Ελλάδας

5–12 εργάσιμες ημέρες · 4 € ανά παραγγελία

Οι πληρωμές και το απόρρητό σας είναι ασφαλή

Επιστροφή χρημάτων λόγω μη παράδοσης

Εγγύηση ποιότητας

Ασφαλής εφοδιαστική

Προστασία απορρήτου

Ασφάλεια και συμμόρφωση

Περιγραφή

Feature: 1. Support measurement frequency up to 2700MHz, can measure resistance, reactance, standing waves, s11. 2. Built‑in protection against overvoltage, overcurrent and short circuit, with stable performance. 3. Equipped with a 2.4in TFT display with a resolution of 320x240 and can be set to automatically shut down. 4. Selected high‑quality alloy materials, durable and can be used for a long time. 5. Antenna analyzer has high measurement accuracy, stable appearance and good performance. Specification: Item Type: Antenna Analyzer Material: Alloy Model: PS200 Working Frequency: 34.5MHz 2700MHz Frequency Step: 1kHz Display: 2.4in TFT Resolution 320x240 (QVGA) Battery Capacity: 3600mAH (7.4Wh) (Built In Battery) Power Consumption: <1.5W Charging Current: 400mA Charging Interface: USB (for the time being only used as a charging interface, data transmission is temporarily not open) Automatic Shutdown: Can be set (always on, 5 minutes to 60 minutes optional) Measurement Parameters: Resistance, reactance, standing waves, s11 Resolution: 4 effective digits Frequency Accuracy: <+ 3ppm Connector: SMA K Impedance: 0.1 Ohm 1000 Ohm (absolute value of impedance) Standing Waves: 1.000 65 Measuring Range: S11 (DB) 0dB 60dB Impedance: <The absolute value of impedance*3percent + 0.1 Ohm (Z is less than 200 Ohm , <1.5GHz) Standing Waves: <effective reading*10percent + 0.10.1 dB 5 degrees (0dB 10dB) 1dB 10 degrees ( 10dB 20dB) Error: (single point measurement) s11 (dB degrees ) 5dB 20 degrees ( 20dB 40dB) Directivity: <35dB (140MHz 2GHz after calibration), <30dB (2GHz 2.7GHz) Scanning Points: 280 Output Level: 18dBm Working Temperature: 0 celsius 40 celsius How to Use: When you get the product, there is a RESET button at the bottom, press it once to turn it on. The M button can switch between different data observations. The left and right buttons are the switch buttons. Can turn off the product by pressing the ok power button for 2 seconds. The upper rotate button can adjust the maximum and minimum measurement value of the product, which is very convenient to use. . Package List: 1 x Antenna Analyzer1 x USB Cable1 x Manual Note:

Αναφορά προβλήματος