Build Plate Replacement for Q2 Q2C 3D Printers 280x280mm PET PEO Spring Steel Bed Plate Sheet

Everything looks good, doesn't bind or have any play. The red hotend mount plate feels light and is quite ugly, but a lighter printhead is never a problem, and there's spray paint for the rest. I knew what I was buying, matches the description and isn't missing anything. Will update when I get everything built up and working. EDIT: needs cleaning and lubrication, which is normal for new linear rails, works as intended, no binding or play when assembled. EDIT2: After half a year of use, still doing its job with no failures or incidents.

Works as intended, no more z-banding (at all, 0, none, perfect layers) a few mismatched screws in the pack, but didn't influence the overall build. The supplied lead screw guides can be mounted on the inner side of the vertical extrusions for an improvised mechanical gantry leveling tool. Gently ram your gantry into them, manually lower it, then home all. Make sure you set them perfectly horizontal and correct your build volume settings.

The device works efficiently, but with such a small size it could have been assembled and sent in a parcel somewhere, the shipment would not be too large. I guess the manufacturer wanted to reduce costs by sending the device in parts. Apart from that everything is absolutely fine.

Good quality, excellent packaging, can't wait to try it out. EDIT: Tested, works well, heats up really fast. EDIT: After half a year of use, works like new, handles 150mm/s at 0.28mm layer height with no problems.

Well received but box a little crumpled, not very solid. Very light sheets in terms of weight, not like a normal printer sheet in a ream. You have to be a little careful.

We don't know how to mount the manifold it doesn't hold the notches are missing Thank you for rectifying this have a good day

Really well packaged. EDIT: works flawlessly, very low margin of error.

Unfortunately, a leveling board with only three feet is of no use. 😡