1Pcs Led Light Strip Jog/Latch Touch Type Single Key Switch Induction Module 3-30V Touch Button Switch Sensing Module

Description 3-30V Touch Button Switch Sensing Module For LED Light Strip Jog/Latch Touch Type Single Key Switch Induction Module Features 1. Supports 3-30V wide voltage input, compatible with various device power requirements 2. Maximum 2A output current, reliably drives low-power appliances like LED strips 3. Blue indicator light illuminates/extinguishes with switch status, providing -time device operation feedback 4. 3P standard connector for quick wiring, no complex debugging required 5. Precisely senses different panel materials including acrylic, metal, and thin wood panels Parameter Input Voltage: 3-30V Output Current: 0-2A Sensing Distance: 6-8mm Power-On Output Voltage: = Power Supply Voltage Standby Output Voltage: 0V LED Color: Blue Power-On Status: LED On Standby Status: LED Off Power Input: Red Wire Negative Terminal: Black Wire Output Terminal: Yellow Wire Port: 3P 1.25mm Material: Plastic+Metal Size: 20.5 * 10.3mm Product Description The module supports 3-30V input voltage control with a maximum output current of 2A. Commonly used for touch switch control in various acrylic panels, enclosures, and thin wood panels, it can directly drive low-power appliances, light strips, LED lights, and similar devices. ABC Three-Point Description A (Default: No 0R Resistor): Output state selection after power-on - Without 0R resistor at Point A: Output is off after power-up - With 0R resistor at Point A: Outputs voltage immediately after power-up B (Default with 0R resistor): Latch Mode / Momentary Mode - With 0R resistor at Point B: Latch Mode (Press once to turn on/off) - Without 0R resistor at Point B: Momentary Mode (Output when touched, no output when released) C: Sensitivity Adjustment Adjusts touch sensing distance. Default is maximum distance (7-8mm). To reduce sensitivity, install a 1~50 pF capacitor based on actual conditions. Smaller capacitors increase sensitivity; larger capacitors decrease sensitivity. PCB default capacitor is 6 pF. Package include 1 * Module Note: 1. The color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. Please refer to the actual product received. 2. Please allow slight manual measurement deviation for the data. The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.