LEXOR Aero Molding, Universal Rubber Seal Strip, T-Shaped, Front, Rear, Side, Bumper Adhesive Tape, Gap Filler, Edge Trim, Black, 12m

These rubber moldings fill the gap between the body and aero parts, preventing dirt and debris from building up. They maintain the beautiful seams between spoiler parts and body parts for years to come. While they're also used in some dealership-installed aero parts, they're also great for DIY aero parts installations or for reinforcing parts not installed by a shop. If the body is coated, they may not adhere well. When applying the moldings, treat the surface with a solvent or other suitable agent before applying them. [Important Note] These moldings are designed to fill the gap between the body and aero parts, not to secure the aero parts in place. Please note. Sharp angles may cause the moldings to float or not fit properly. If this is difficult, we recommend cutting them at an angle and using a joint instead of using a continuous piece. These rubber moldings fill the gap between the body and aero parts, preventing dirt and debris from building up. They maintain the beautiful seams between spoiler parts and body parts for years to come. Although it is also used in aero parts installation by some dealers, it can also be used as reinforcement for DIY aero part installation or when the moldings have not been installed by a shop. If the body is coated, the molding may not stick or bond sufficiently. When applying the molding, treat the surface with a solvent or similar product before pressing it firmly. [Note] This molding is designed to fill the gap between the body and aero parts, and is not intended to securely attach the aero parts. Please understand this. Parts with sharp angles may float or not fit together properly. If this is difficult, we would appreciate it if you could adjust it by cutting it at an angle and using a joint rather than using it continuously.