Gate Lock + 3X Chip Set Chip Gate Set

Complete electronic lock for a gate/gate with chips. A 90-degree angle lock that allows installation on any external gate or door. Entering your property will now be a breeze without having to search for keys. The perfect solution where conventional solutions with a mains connection aren't necessarily available. Don't worry - when the battery is running low, the device will notify you with an audible signal well in advance. If you fail to charge it within 5-7 days despite constant audible notifications that it needs to be charged, the lock will unlock automatically. Included: complete electronic lock x1 reading chip x3 (programmed) programming card (up to 13 chips) mounting kit sticker indicating where to place the chip user's manual in Polish (pdf) Each device is checked for locking before shipment. Battery charging via a micro USB cable (not included) or batteries. Instructions below: Technical specifications Number of main cards: 3 Number of user cards: 13 Operating temperature: -25°C - 55°C Humidity: 5% ~ 97%RH Batteries: Alkaline batteries 2 x AA (do not use carbon batteries) Battery life: approx. 1 year without charging!!! Alarm voltage: 2.4V Opening voltage: 2.2V CARD TYPE 1) Main card (3 sets included), user card (13 sets to be added) The first user card is a guest card, and the remaining 12 user cards are service cards 2) The main card is used to add guest and service cards. The main card allows unlocking in any mode. 3) The service card is used to deactivate the lock using a guest card. Configuration 1) Press the button for approximately 3 seconds until you hear a beep. At this point, all cards will be deleted and the default single card mode will be activated. 2) When the door lock is empty, you can set the master card. The user can set up to 3 master cards. 3) After the master card is read, the door lock opens and the beep continues. At this point, you can add a service card and a guest card. The first card added is the guest card, and the subsequent ones are service cards. After successfully adding the card, a "Di-" beep will sound. If the device's memory is full, a sequence of "Di-Di-Di-Di-" beeps will sound. After successfully adding the cards, exit the card registration mode. Unlocking. 1) Single Card Mode: Read the service card (guest card). The door will be unlocked and then automatically locked after 4 seconds. 2) 2 Card Mode: Read the service card or guest card, a continuous beep will sound, then read the guest card (or service card) within 4 seconds. The door will be unlocked and then automatically locked after 4 seconds. 3) In 2 card mode, it is possible to read the guest card and the service card. The maximum time for reading cards is 4 seconds. Master Card Functions 1) Read the master card to enter the card adding mode. 2) Wait 5 seconds after reading the master card 4 times continuously to turn the beeper on or off. The sequence "Do-Ri-Mi-Di-Ri-Mi" means the beeper is on, and the sequence "Di-Di-Di-" means the beeper is off 3) Wait 5 seconds after reading the master card 6 times continuously to turn the single card mode or 2 card mode on or off. The sequence "Di-" means activates single card mode, and the sequence "Di-Di-" activates 2 card mode. 4) Wait 5 seconds after reading the master card 8 times continuously to delete all guest cards and service cards. 5) After reading the master card 10 times continuously, all master cards are deleted. Low battery When the battery level is low, the device will emit a long beep. In this case, replace the batteries immediately. If the batteries are not replaced, the door will not lock or unlock.